[    0.000000] Reserving virtual address space above 0xff400000
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.32-5-xen-686 (Debian 2.6.32-29) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Fri Dec 10 20:52:42 UTC 2010
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] xen_release_chunk: looking at area pfn d0000-e0000: 65536 pages freed
[    0.000000] xen_release_chunk: looking at area pfn f0000-fe000: 57344 pages freed
[    0.000000] released 122880 pages of unused memory
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  Xen: 0000000000000000 - 00000000000a0000 (usable)
[    0.000000]  Xen: 00000000000a0000 - 0000000000100000 (reserved)
[    0.000000]  Xen: 0000000000100000 - 00000000cfaa0000 (usable)
[    0.000000]  Xen: 00000000cfaa0000 - 00000000cfab6000 (reserved)
[    0.000000]  Xen: 00000000cfab6000 - 00000000cfad5c00 (ACPI data)
[    0.000000]  Xen: 00000000cfad5c00 - 00000000d0000000 (reserved)
[    0.000000]  Xen: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  Xen: 00000000fe000000 - 0000000100000000 (reserved)
[    0.000000] DMI 2.5 present.
[    0.000000] last_pfn = 0xcfaa0 max_arch_pfn = 0x1000000
[    0.000000] x86 PAT enabled: cpu 0, old 0x50100070406, new 0x7010600070106
[    0.000000] initial memory mapped : 0 - 037ff000
[    0.000000] init_memory_mapping: 0000000000000000-0000000036bfe000
[    0.000000] NX (Execute Disable) protection: active
[    0.000000]  0000000000 - 0036bfe000 page 4k
[    0.000000] kernel direct mapping tables up to 36bfe000 @ 100000-2bb000
[    0.000000] RAMDISK: 0164f000 - 02a34c00
[    0.000000] ACPI: RSDP 000f2400 00024 (v02 DELL  )
[    0.000000] ACPI: XSDT 000f248c 00084 (v01 DELL   PE_SC3   00000001 DELL 00000001)
[    0.000000] ACPI: FACP cfad34f8 000F4 (v03 DELL   PE_SC3   00000001 DELL 00000001)
[    0.000000] ACPI: DSDT cfab6000 03E0D (v01 DELL   PE_SC3   00000001 INTL 20050624)
[    0.000000] ACPI: FACS cfad5c00 00040
[    0.000000] ACPI: APIC cfad3078 0008A (v01 DELL   PE_SC3   00000001 DELL 00000001)
[    0.000000] ACPI: SPCR cfad3104 00050 (v01 DELL   PE_SC3   00000001 DELL 00000001)
[    0.000000] ACPI: HPET cfad3158 00038 (v01 DELL   PE_SC3   00000001 DELL 00000001)
[    0.000000] ACPI: MCFG cfad3194 0003C (v01 DELL   PE_SC3   00000001 DELL 00000001)
[    0.000000] ACPI: WD__ cfad31d4 00134 (v01 DELL   PE_SC3   00000001 DELL 00000001)
[    0.000000] ACPI: SLIC cfad330c 00176 (v01 DELL   PE_SC3   00000001 DELL 00000001)
[    0.000000] ACPI: ERST cfab9f90 00210 (v01 DELL   PE_SC3   00000001 DELL 00000001)
[    0.000000] ACPI: HEST cfaba1a0 0027C (v01 DELL   PE_SC3   00000001 DELL 00000001)
[    0.000000] ACPI: BERT cfab9e10 00030 (v01 DELL   PE_SC3   00000001 DELL 00000001)
[    0.000000] ACPI: EINJ cfab9e40 00150 (v01 DELL   PE_SC3   00000001 DELL 00000001)
[    0.000000] ACPI: TCPA cfad3490 00064 (v01 DELL   PE_SC3   00000001 DELL 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 2446MB HIGHMEM available.
[    0.000000] 875MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 36bfe000
[    0.000000]   low ram: 0 - 36bfe000
[    0.000000]   node 0 low ram: 00000000 - 36bfe000
[    0.000000]   node 0 bootmap 00007000 - 0000dd80
[    0.000000] (10 early reservations) ==> bootmem [0000000000 - 0036bfe000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0002e38000 - 0002e56000]   XEN PAGETABLES ==> [0002e38000 - 0002e56000]
[    0.000000]   #2 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #3 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #4 [0001000000 - 00015298d4]    TEXT DATA BSS ==> [0001000000 - 00015298d4]
[    0.000000]   #5 [000164f000 - 0002a34c00]          RAMDISK ==> [000164f000 - 0002a34c00]
[    0.000000]   #6 [0002a35000 - 0002e38000]   XEN START INFO ==> [0002a35000 - 0002e38000]
[    0.000000]   #7 [000152a000 - 000152a235]              BRK ==> [000152a000 - 000152a235]
[    0.000000]   #8 [0000100000 - 000029d000]          PGTABLE ==> [0000100000 - 000029d000]
[    0.000000]   #9 [0000007000 - 000000e000]          BOOTMAP ==> [0000007000 - 000000e000]
[    0.000000] found SMP MP-table at [c00fe710] fe710
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000000 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x00036bfe
[    0.000000]   HighMem  0x00036bfe -> 0x000cfaa0
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x000000a0
[    0.000000]     0: 0x00000100 -> 0x000cfaa0
[    0.000000] On node 0 totalpages: 850496
[    0.000000] free_area_init_node: node 0, pgdat c13f2cc0, node_mem_map c2e56000
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3968 pages, LIFO batch:0
[    0.000000]   Normal zone: 1720 pages used for memmap
[    0.000000]   Normal zone: 218438 pages, LIFO batch:31
[    0.000000]   HighMem zone: 4894 pages used for memmap
[    0.000000]   HighMem zone: 621444 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-0
[    0.000000] ACPI: IOAPIC (id[0x05] address[0xfec10000] gsi_base[256])
[    0.000000] IOAPIC[1]: apic_id 5, version 0, address 0xfec10000, GSI 256-256
[    0.000000] ACPI: IOAPIC (id[0x06] address[0xfec10000] gsi_base[64])
[    0.000000] IOAPIC[2]: apic_id 6, version 0, address 0xfec10000, GSI 64-64
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ERROR: Unable to locate IOAPIC for GSI 2
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ERROR: Unable to locate IOAPIC for GSI 9
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 512
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:10000000)
[    0.000000] Booting paravirtualized kernel on Xen
[    0.000000] Xen version: 4.0.1 (preserve-AD) (dom0)
[    0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 15 pages/cpu @c4860000 s37656 r0 d23784 u65536
[    0.000000] pcpu-alloc: s37656 r0 d23784 u65536 alloc=16*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] trying to map vcpu_info 0 at c4861010, mfn 229b91, offset 16
[    0.000000] cpu 0 using vcpu_info at c4861010
[    0.000000] trying to map vcpu_info 1 at c4871010, mfn 229ba1, offset 16
[    0.000000] cpu 1 using vcpu_info at c4871010
[    0.000000] trying to map vcpu_info 2 at c4881010, mfn 229bb1, offset 16
[    0.000000] cpu 2 using vcpu_info at c4881010
[    0.000000] trying to map vcpu_info 3 at c4891010, mfn 229bc1, offset 16
[    0.000000] cpu 3 using vcpu_info at c4891010
[    0.000000] Xen: using vcpu_info placement
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 843850
[    0.000000] Kernel command line: nomodeset root=/dev/mapper/data-root ro rootdelay=90 video=radeonfb:1024x768 xencons=hvc
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] DMA: Placing 64MB software IO TLB between c4964000 - c8964000
[    0.000000] DMA: software IO TLB at phys 0x4964000 - 0x8964000
[    0.000000] xen_swiotlb_fixup: buf=c4964000 size=67108864
[    0.000000] xen_swiotlb_fixup: buf=c89c4000 size=32768
[    0.000000] Initializing HighMem for node 0 (00036bfe:000cfaa0)
[    0.000000] Memory: 3275732k/3402368k available (2633k kernel code, 125232k reserved, 1449k data, 404k init, 2505352k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xff156000 - 0xff3ff000   (2724 kB)
[    0.000000]     pkmap   : 0xfec00000 - 0xfee00000   (2048 kB)
[    0.000000]     vmalloc : 0xf73fe000 - 0xfebfe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf6bfe000   ( 875 MB)
[    0.000000]       .init : 0xc13fd000 - 0xc1462000   ( 404 kB)
[    0.000000]       .data : 0xc1292441 - 0xc13fcad8   (1449 kB)
[    0.000000]       .text : 0xc1000000 - 0xc1292441   (2633 kB)
[    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:1536
[    0.000000] xen: --> irq=0
[    0.000000] xen: --> irq=1
[    0.000000] xen: --> irq=2
[    0.000000] xen: --> irq=3
[    0.000000] xen: --> irq=4
[    0.000000] xen: --> irq=5
[    0.000000] xen: --> irq=6
[    0.000000] xen: --> irq=7
[    0.000000] xen: --> irq=8
[    0.000000] xen: --> irq=9
[    0.000000] xen: --> irq=10
[    0.000000] xen: --> irq=11
[    0.000000] xen: --> irq=12
[    0.000000] xen: --> irq=13
[    0.000000] xen: --> irq=14
[    0.000000] xen: --> irq=15
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] xen: sci override: source_irq=9 global_irq=9 trigger=c polarity=1
[    0.000000] xen: registering gsi 9 triggering 0 polarity 0
[    0.000000] xen_allocate_pirq: returning irq 9 for gsi 9
[    0.000000] xen: --> irq=9
[    0.000000] xen: acpi sci 9
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Xen: using vcpuop timer interface
[    0.000000] installing Xen timer for CPU 0
[    0.000000] Detected 2833.376 MHz processor.
[    0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5666.75 BogoMIPS (lpj=11333504)
[    0.004000] Security Framework initialized
[    0.004000] SELinux:  Disabled at boot.
[    0.004000] Mount-cache hash table entries: 512
[    0.004000] Initializing cgroup subsys ns
[    0.004000] Initializing cgroup subsys cpuacct
[    0.004000] Initializing cgroup subsys devices
[    0.004000] Initializing cgroup subsys freezer
[    0.004000] Initializing cgroup subsys net_cls
[    0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.004000] CPU: L2 cache: 6144K
[    0.004000] CPU: Physical Processor ID: 0
[    0.004000] CPU: Processor Core ID: 0
[    0.004000] mce: CPU supports 6 MCE banks
[    0.004000] Performance Events: unsupported p6 CPU model 23 no PMU driver, software events only.
[    0.004000] SMP alternatives: switching to UP code
[    0.004000] ACPI: Core revision 20090903
[    0.010080] installing Xen timer for CPU 1
[    0.010161] SMP alternatives: switching to SMP code
[    0.004000] Initializing CPU#1
[    0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.004000] CPU: L2 cache: 6144K
[    0.004000] CPU: Physical Processor ID: 0
[    0.004000] CPU: Processor Core ID: 1
[    0.012156] installing Xen timer for CPU 2
[    0.004000] Initializing CPU#2
[    0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.004000] CPU: L2 cache: 6144K
[    0.004000] CPU: Physical Processor ID: 0
[    0.004000] CPU: Processor Core ID: 2
[    0.012678] installing Xen timer for CPU 3
[    0.004000] Initializing CPU#3
[    0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.004000] CPU: L2 cache: 6144K
[    0.004000] CPU: Physical Processor ID: 0
[    0.004000] CPU: Processor Core ID: 3
[    0.013099] Brought up 4 CPUs
[    0.015171] CPU0 attaching sched-domain:
[    0.015174]  domain 0: span 0-3 level CPU
[    0.015179]   groups: 0 1 2 3
[    0.015191] CPU1 attaching sched-domain:
[    0.015194]  domain 0: span 0-3 level CPU
[    0.015199]   groups: 1 2 3 0
[    0.015210] CPU2 attaching sched-domain:
[    0.015213]  domain 0: span 0-3 level CPU
[    0.015218]   groups: 2 3 0 1
[    0.015229] CPU3 attaching sched-domain:
[    0.015232]  domain 0: span 0-3 level CPU
[    0.015237]   groups: 3 0 1 2
[    0.015322] devtmpfs: initialized
[    0.016059] Grant table initialized
[    0.016111] regulator: core version 0.5
[    0.016220] NET: Registered protocol family 16
[    0.016360] ACPI: bus type pci registered
[    0.016360] sync cpu 0 get result 1 max_id 3
[    0.016360] sync cpu 1 get result 1 max_id 3
[    0.016360] sync cpu 2 get result 1 max_id 3
[    0.016360] sync cpu 3 get result 1 max_id 3
[    0.016360] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.016360] PCI: MCFG area at e0000000 reserved in E820
[    0.016380] PCI: Using MMCONFIG for extended config space
[    0.016435] PCI: Using configuration type 1 for base access
[    0.017023] bio: create slab <bio-0> at 0
[    0.017023] ERROR: Unable to locate IOAPIC for GSI 9
[    0.017038] ACPI: EC: Look up EC in DSDT
[    0.022155] ACPI Error (psargs-0359): [CDW1] Namespace lookup failure, AE_NOT_FOUND
[    0.022290] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_._OSC] (Node f640e258), AE_NOT_FOUND
[    0.023982] ACPI: BIOS _OSI(Linux) query ignored
[    0.024282] ACPI: Interpreter enabled
[    0.024339] ACPI: (supports S0 S4 S5)
[    0.024510] ACPI: Using IOAPIC for interrupt routing
[    0.032390] ACPI: No dock devices found.
[    0.033076] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.033276] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[    0.033335] pci 0000:00:00.0: PME# disabled
[    0.033515] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[    0.033575] pci 0000:00:02.0: PME# disabled
[    0.033747] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[    0.033807] pci 0000:00:03.0: PME# disabled
[    0.033983] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[    0.034042] pci 0000:00:04.0: PME# disabled
[    0.034218] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[    0.034277] pci 0000:00:05.0: PME# disabled
[    0.034453] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[    0.034512] pci 0000:00:06.0: PME# disabled
[    0.034685] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[    0.034744] pci 0000:00:07.0: PME# disabled
[    0.035454] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.035514] pci 0000:00:1c.0: PME# disabled
[    0.035704] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.035764] pci 0000:00:1c.4: PME# disabled
[    0.035948] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.036001] pci 0000:00:1c.5: PME# disabled
[    0.036001] pci 0000:00:1d.0: reg 20 io port: [0xbc80-0xbc9f]
[    0.036001] pci 0000:00:1d.1: reg 20 io port: [0xbca0-0xbcbf]
[    0.036001] pci 0000:00:1d.2: reg 20 io port: [0xbcc0-0xbcdf]
[    0.036001] pci 0000:00:1d.3: reg 20 io port: [0xbce0-0xbcff]
[    0.036001] pci 0000:00:1d.7: reg 10 32bit mmio: [0xdf7ffc00-0xdf7fffff]
[    0.036001] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.036001] pci 0000:00:1d.7: PME# disabled
[    0.036001] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[    0.036001] pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH6 GPIO
[    0.036001] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0c00 (mask 007f)
[    0.036001] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 000f)
[    0.036001] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 00e8 (mask 0003)
[    0.036001] pci 0000:00:1f.2: reg 10 io port: [0xbc20-0xbc27]
[    0.036001] pci 0000:00:1f.2: reg 14 io port: [0xbc10-0xbc13]
[    0.036001] pci 0000:00:1f.2: reg 18 io port: [0xbc28-0xbc2f]
[    0.036001] pci 0000:00:1f.2: reg 1c io port: [0xbc14-0xbc17]
[    0.036001] pci 0000:00:1f.2: reg 20 io port: [0xbc40-0xbc4f]
[    0.036001] pci 0000:00:1f.2: reg 24 io port: [0xbc50-0xbc5f]
[    0.036001] pci 0000:00:1f.5: reg 10 io port: [0xbc30-0xbc37]
[    0.036001] pci 0000:00:1f.5: reg 14 io port: [0xbc18-0xbc1b]
[    0.036001] pci 0000:00:1f.5: reg 18 io port: [0xbc38-0xbc3f]
[    0.036001] pci 0000:00:1f.5: reg 1c io port: [0xbc1c-0xbc1f]
[    0.036001] pci 0000:00:1f.5: reg 20 io port: [0xbc60-0xbc6f]
[    0.036001] pci 0000:00:1f.5: reg 24 io port: [0xbc70-0xbc7f]
[    0.036001] pci 0000:03:00.0: reg 10 io port: [0xec00-0xecff]
[    0.036001] pci 0000:03:00.0: reg 14 64bit mmio: [0xdf9ec000-0xdf9effff]
[    0.036001] pci 0000:03:00.0: reg 1c 64bit mmio: [0xdf9f0000-0xdf9fffff]
[    0.036001] pci 0000:03:00.0: reg 30 32bit mmio pref: [0xdf800000-0xdf8fffff]
[    0.036001] pci 0000:03:00.0: supports D1 D2
[    0.036001] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.036001] pci 0000:00:02.0: bridge io port: [0xe000-0xefff]
[    0.036001] pci 0000:00:02.0: bridge 32bit mmio: [0xdf800000-0xdf9fffff]
[    0.036001] pci 0000:06:00.0: reg 10 32bit mmio: [0xdfafe000-0xdfafffff]
[    0.036001] pci 0000:06:00.0: PME# supported from D0 D3hot
[    0.036001] pci 0000:06:00.0: PME# disabled
[    0.036001] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.036001] pci 0000:00:05.0: bridge io port: [0xd000-0xdfff]
[    0.036001] pci 0000:00:05.0: bridge 32bit mmio: [0xdfa00000-0xdfcfffff]
[    0.036001] pci 0000:07:08.0: reg 10 io port: [0xdc00-0xdcff]
[    0.036001] pci 0000:07:08.0: reg 14 64bit mmio: [0xdfcc0000-0xdfcdffff]
[    0.036001] pci 0000:07:08.0: reg 1c 64bit mmio: [0xdfce0000-0xdfcfffff]
[    0.036001] pci 0000:07:08.0: reg 30 32bit mmio pref: [0xdfb00000-0xdfbfffff]
[    0.036001] pci 0000:07:08.0: supports D1 D2
[    0.036001] pci 0000:06:00.0: bridge io port: [0xd000-0xdfff]
[    0.036001] pci 0000:06:00.0: bridge 32bit mmio: [0xdfb00000-0xdfcfffff]
[    0.036075] pci 0000:0a:00.0: PXH quirk detected; SHPC device MSI disabled
[    0.036219] pci 0000:0a:00.0: PME# supported from D0 D3hot D3cold
[    0.036279] pci 0000:0a:00.0: PME# disabled
[    0.036385] pci 0000:0a:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.036799] pci 0000:01:00.0: reg 10 64bit mmio: [0xdfdf0000-0xdfdfffff]
[    0.036931] pci 0000:01:00.0: PME# supported from D3hot D3cold
[    0.036992] pci 0000:01:00.0: PME# disabled
[    0.044225] pci 0000:00:1c.4: bridge 32bit mmio: [0xdfd00000-0xdfdfffff]
[    0.044348] pci 0000:02:00.0: reg 10 64bit mmio: [0xdfef0000-0xdfefffff]
[    0.044479] pci 0000:02:00.0: PME# supported from D3hot D3cold
[    0.044540] pci 0000:02:00.0: PME# disabled
[    0.052223] pci 0000:00:1c.5: bridge 32bit mmio: [0xdfe00000-0xdfefffff]
[    0.052312] pci 0000:0c:07.0: reg 10 32bit mmio pref: [0xd0000000-0xd7ffffff]
[    0.052325] pci 0000:0c:07.0: reg 14 io port: [0xcc00-0xccff]
[    0.052337] pci 0000:0c:07.0: reg 18 32bit mmio: [0xdfff0000-0xdfffffff]
[    0.052377] pci 0000:0c:07.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[    0.052413] pci 0000:0c:07.0: supports D1 D2
[    0.052490] pci 0000:00:1e.0: transparent bridge
[    0.052547] pci 0000:00:1e.0: bridge io port: [0xc000-0xcfff]
[    0.052555] pci 0000:00:1e.0: bridge 32bit mmio: [0xdff00000-0xdfffffff]
[    0.052566] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xd0000000-0xd7ffffff]
[    0.052645] pci_bus 0000:00: on NUMA node 0
[    0.052651] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.053799] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
[    0.054058] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[    0.054334] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
[    0.054590] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT]
[    0.054875] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SBE0._PRT]
[    0.055138] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SBE0.PXHB._PRT]
[    0.055396] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SBE4._PRT]
[    0.055652] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SBE5._PRT]
[    0.055908] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.COMP._PRT]
[    0.068045] ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[    0.068624] ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[    0.069198] ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.069854] ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.070424] ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.070994] ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.071565] ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[    0.072140] ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.072653] xen_balloon: Initialising balloon driver with page order 0.
[    0.072795] vgaarb: device added: PCI:0000:0c:07.0,decodes=io+mem,owns=io+mem,locks=none
[    0.072870] vgaarb: loaded
[    0.072953] PCI: Using ACPI for IRQ routing
[    0.072953] Switching to clocksource xen
[    0.074035] pnp: PnP ACPI init
[    0.074108] ACPI: bus type pnp registered
[    0.074688] xen: registering gsi 13 triggering 1 polarity 0
[    0.074692] xen_allocate_pirq: returning irq 13 for gsi 13
[    0.074747] xen: --> irq=13
[    0.074985] xen: registering gsi 8 triggering 1 polarity 0
[    0.074988] xen_allocate_pirq: returning irq 8 for gsi 8
[    0.075044] xen: --> irq=8
[    0.075744] xen: registering gsi 4 triggering 1 polarity 0
[    0.075747] xen_allocate_pirq: returning irq 4 for gsi 4
[    0.075802] xen: --> irq=4
[    0.076367] xen: registering gsi 3 triggering 1 polarity 0
[    0.076371] xen_allocate_pirq: returning irq 3 for gsi 3
[    0.076426] xen: --> irq=3
[    0.080632] pnp: PnP ACPI: found 12 devices
[    0.080685] ACPI: ACPI bus type pnp unregistered
[    0.080739] PnPBIOS: Disabled
[    0.080804] system 00:08: ioport range 0x800-0x87f has been reserved
[    0.080862] system 00:08: ioport range 0x880-0x8bf has been reserved
[    0.080919] system 00:08: ioport range 0x8c0-0x8df has been reserved
[    0.080976] system 00:08: ioport range 0x8e0-0x8e3 has been reserved
[    0.081033] system 00:08: ioport range 0x900-0x900 has been reserved
[    0.081090] system 00:08: ioport range 0xc00-0xc0f has been reserved
[    0.081147] system 00:08: ioport range 0xc10-0xc1f has been reserved
[    0.081204] system 00:08: ioport range 0xca0-0xca7 has been reserved
[    0.081261] system 00:08: ioport range 0xca9-0xcab has been reserved
[    0.081318] system 00:08: ioport range 0xcad-0xcaf has been reserved
[    0.081375] system 00:08: ioport range 0xc20-0xc3f has been reserved
[    0.081436] system 00:09: ioport range 0xca8-0xca8 has been reserved
[    0.081494] system 00:09: ioport range 0xcac-0xcac has been reserved
[    0.081564] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
[    0.086003] PM-Timer failed consistency check  (0x0xffffff) - aborting.
[    0.086237] pci 0000:00:02.0: PCI bridge, secondary bus 0000:03
[    0.086295] pci 0000:00:02.0:   IO window: 0xe000-0xefff
[    0.086354] pci 0000:00:02.0:   MEM window: 0xdf800000-0xdf9fffff
[    0.086413] pci 0000:00:02.0:   PREFETCH window: disabled
[    0.086476] pci 0000:00:03.0: PCI bridge, secondary bus 0000:04
[    0.086531] pci 0000:00:03.0:   IO window: disabled
[    0.086589] pci 0000:00:03.0:   MEM window: disabled
[    0.086646] pci 0000:00:03.0:   PREFETCH window: disabled
[    0.086707] pci 0000:00:04.0: PCI bridge, secondary bus 0000:05
[    0.086762] pci 0000:00:04.0:   IO window: disabled
[    0.086820] pci 0000:00:04.0:   MEM window: disabled
[    0.086877] pci 0000:00:04.0:   PREFETCH window: disabled
[    0.086938] pci 0000:06:00.0: PCI bridge, secondary bus 0000:07
[    0.086996] pci 0000:06:00.0:   IO window: 0xd000-0xdfff
[    0.087059] pci 0000:06:00.0:   MEM window: 0xdfb00000-0xdfcfffff
[    0.087120] pci 0000:06:00.0:   PREFETCH window: disabled
[    0.087185] pci 0000:00:05.0: PCI bridge, secondary bus 0000:06
[    0.087242] pci 0000:00:05.0:   IO window: 0xd000-0xdfff
[    0.087302] pci 0000:00:05.0:   MEM window: 0xdfa00000-0xdfcfffff
[    0.087361] pci 0000:00:05.0:   PREFETCH window: disabled
[    0.087422] pci 0000:00:06.0: PCI bridge, secondary bus 0000:08
[    0.087477] pci 0000:00:06.0:   IO window: disabled
[    0.087535] pci 0000:00:06.0:   MEM window: disabled
[    0.087592] pci 0000:00:06.0:   PREFETCH window: disabled
[    0.087653] pci 0000:00:07.0: PCI bridge, secondary bus 0000:09
[    0.087708] pci 0000:00:07.0:   IO window: disabled
[    0.087766] pci 0000:00:07.0:   MEM window: disabled
[    0.087823] pci 0000:00:07.0:   PREFETCH window: disabled
[    0.087884] pci 0000:0a:00.0: PCI bridge, secondary bus 0000:0b
[    0.087939] pci 0000:0a:00.0:   IO window: disabled
[    0.088014] pci 0000:0a:00.0:   MEM window: disabled
[    0.088077] pci 0000:0a:00.0:   PREFETCH window: disabled
[    0.088140] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0a
[    0.088195] pci 0000:00:1c.0:   IO window: disabled
[    0.088254] pci 0000:00:1c.0:   MEM window: disabled
[    0.088312] pci 0000:00:1c.0:   PREFETCH window: disabled
[    0.088374] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:01
[    0.088429] pci 0000:00:1c.4:   IO window: disabled
[    0.088488] pci 0000:00:1c.4:   MEM window: 0xdfd00000-0xdfdfffff
[    0.088556] pci 0000:00:1c.4:   PREFETCH window: disabled
[    0.088619] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:02
[    0.088674] pci 0000:00:1c.5:   IO window: disabled
[    0.088733] pci 0000:00:1c.5:   MEM window: 0xdfe00000-0xdfefffff
[    0.088792] pci 0000:00:1c.5:   PREFETCH window: disabled
[    0.088857] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0c
[    0.088914] pci 0000:00:1e.0:   IO window: 0xc000-0xcfff
[    0.088974] pci 0000:00:1e.0:   MEM window: 0xdff00000-0xdfffffff
[    0.089034] pci 0000:00:1e.0:   PREFETCH window: 0x000000d0000000-0x000000d7ffffff
[    0.089125] xen: registering gsi 16 triggering 0 polarity 1
[    0.089137] xen: --> irq=16
[    0.089144] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.089205] pci 0000:00:02.0: setting latency timer to 64
[    0.089220] pci 0000:00:03.0: setting latency timer to 64
[    0.089234] xen: registering gsi 16 triggering 0 polarity 1
[    0.089237] xen_allocate_pirq: returning irq 16 for gsi 16
[    0.089291] xen: --> irq=16
[    0.089295] Already setup the GSI :16
[    0.089346] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.089406] pci 0000:00:04.0: setting latency timer to 64
[    0.089420] xen: registering gsi 16 triggering 0 polarity 1
[    0.089423] xen_allocate_pirq: returning irq 16 for gsi 16
[    0.089477] xen: --> irq=16
[    0.089480] Already setup the GSI :16
[    0.089503] pci 0000:00:05.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.089503] pci 0000:00:05.0: setting latency timer to 64
[    0.089503] xen: registering gsi 16 triggering 0 polarity 1
[    0.089503] xen_allocate_pirq: returning irq 16 for gsi 16
[    0.089503] xen: --> irq=16
[    0.089673] Already setup the GSI :16
[    0.089724] pci 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.089786] pci 0000:06:00.0: setting latency timer to 64
[    0.089800] xen: registering gsi 16 triggering 0 polarity 1
[    0.089803] xen_allocate_pirq: returning irq 16 for gsi 16
[    0.089857] xen: --> irq=16
[    0.089861] Already setup the GSI :16
[    0.089912] pci 0000:00:06.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.089972] pci 0000:00:06.0: setting latency timer to 64
[    0.089989] pci 0000:00:07.0: setting latency timer to 64
[    0.090004] xen: registering gsi 16 triggering 0 polarity 1
[    0.090006] xen_allocate_pirq: returning irq 16 for gsi 16
[    0.090061] xen: --> irq=16
[    0.090064] Already setup the GSI :16
[    0.090115] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.090176] pci 0000:00:1c.0: setting latency timer to 64
[    0.090197] pci 0000:0a:00.0: setting latency timer to 64
[    0.090212] xen: registering gsi 16 triggering 0 polarity 1
[    0.090215] xen_allocate_pirq: returning irq 16 for gsi 16
[    0.090269] xen: --> irq=16
[    0.090272] Already setup the GSI :16
[    0.090324] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.090385] pci 0000:00:1c.4: setting latency timer to 64
[    0.090399] xen: registering gsi 17 triggering 0 polarity 1
[    0.090406] xen: --> irq=17
[    0.090411] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.090472] pci 0000:00:1c.5: setting latency timer to 64
[    0.090485] pci 0000:00:1e.0: setting latency timer to 64
[    0.090491] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.090494] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[    0.090498] pci_bus 0000:03: resource 0 io:  [0xe000-0xefff]
[    0.090501] pci_bus 0000:03: resource 1 mem: [0xdf800000-0xdf9fffff]
[    0.090505] pci_bus 0000:06: resource 0 io:  [0xd000-0xdfff]
[    0.090508] pci_bus 0000:06: resource 1 mem: [0xdfa00000-0xdfcfffff]
[    0.090511] pci_bus 0000:07: resource 0 io:  [0xd000-0xdfff]
[    0.090515] pci_bus 0000:07: resource 1 mem: [0xdfb00000-0xdfcfffff]
[    0.090519] pci_bus 0000:01: resource 1 mem: [0xdfd00000-0xdfdfffff]
[    0.090522] pci_bus 0000:02: resource 1 mem: [0xdfe00000-0xdfefffff]
[    0.090525] pci_bus 0000:0c: resource 0 io:  [0xc000-0xcfff]
[    0.090529] pci_bus 0000:0c: resource 1 mem: [0xdff00000-0xdfffffff]
[    0.090532] pci_bus 0000:0c: resource 2 pref mem [0xd0000000-0xd7ffffff]
[    0.090535] pci_bus 0000:0c: resource 3 io:  [0x00-0xffff]
[    0.090538] pci_bus 0000:0c: resource 4 mem: [0x000000-0xffffffffffffffff]
[    0.090565] NET: Registered protocol family 2
[    0.092448] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.092726] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.093107] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.093308] TCP: Hash tables configured (established 131072 bind 65536)
[    0.093364] TCP reno registered
[    0.093474] NET: Registered protocol family 1
[    0.093695] pci 0000:0a:00.0: rerouting interrupts for [8086:032c]
[    0.093760] pci 0000:0c:07.0: Boot video device
[    0.093805] Unpacking initramfs...
[    0.145389] Freeing initrd memory: 20375k freed
[    0.152386] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.152454] DMA: Placing 64MB software IO TLB between c4964000 - c8964000
[    0.152521] DMA: software IO TLB at phys 0x4964000 - 0x8964000
[    0.153156] audit: initializing netlink socket (disabled)
[    0.153224] type=2000 audit(1294211719.677:1): initialized
[    0.156336] highmem bounce pool size: 64 pages
[    0.156393] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.158292] VFS: Disk quotas dquot_6.5.2
[    0.158395] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.158544] msgmni has been set to 1546
[    0.159096] alg: No test for stdrng (krng)
[    0.159220] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.159295] io scheduler noop registered
[    0.159346] io scheduler anticipatory registered
[    0.159399] io scheduler deadline registered
[    0.159485] io scheduler cfq registered (default)
[    0.159836] pcieport 0000:00:02.0: setting latency timer to 64
[    0.160069] pcieport 0000:00:03.0: setting latency timer to 64
[    0.160287] pcieport 0000:00:04.0: setting latency timer to 64
[    0.160514] pcieport 0000:00:05.0: setting latency timer to 64
[    0.160733] pcieport 0000:00:06.0: setting latency timer to 64
[    0.160947] pcieport 0000:00:07.0: setting latency timer to 64
[    0.161164] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.161390] pcieport 0000:00:1c.4: setting latency timer to 64
[    0.161629] pcieport 0000:00:1c.5: setting latency timer to 64
[    0.162264] aer 0000:00:02.0:pcie02: service driver aer loaded
[    0.162333] aer 0000:00:03.0:pcie02: service driver aer loaded
[    0.162401] aer 0000:00:04.0:pcie02: service driver aer loaded
[    0.162481] aer 0000:00:05.0:pcie02: service driver aer loaded
[    0.162549] aer 0000:00:06.0:pcie02: service driver aer loaded
[    0.162618] aer 0000:00:07.0:pcie02: service driver aer loaded
[    0.162796] isapnp: Scanning for PnP cards...
[    0.517299] isapnp: No Plug & Play device found
[    0.523110] registering netback
[    0.525089] hpet_acpi_add: no address or irqs in _CRS
[    0.525159] Linux agpgart interface v0.103
[    0.525359] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.525558] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.525723] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    0.526080] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.526291] 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    0.526530] PNP: No PS/2 controller found. Probing ports directly.
[    0.529332] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.529392] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.529528] mice: PS/2 mouse device common for all mice
[    0.529629] rtc_cmos 00:04: RTC can wake from S4
[    0.529726] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    0.529810] rtc0: alarms up to one day, y3k, 242 bytes nvram
[    0.529891] cpuidle: using governor ladder
[    0.529944] cpuidle: using governor menu
[    0.529999] No iBFT detected.
[    0.530292] TCP cubic registered
[    0.530496] NET: Registered protocol family 10
[    0.530899] lo: Disabled Privacy Extensions
[    0.531160] Mobile IPv6
[    0.531210] NET: Registered protocol family 17
[    0.531273] Using IPI No-Shortcut mode
[    0.531388] PM: Resume from disk failed.
[    0.531399] registered taskstats version 1
[    0.532434] rtc_cmos 00:04: setting system clock to 2011-01-05 07:15:19 UTC (1294211719)
[    0.532540] Initalizing network drop monitor service
[    0.532629] Freeing unused kernel memory: 404k freed
[    0.533433] Write protecting the kernel text: 2636k
[    0.533747] Write protecting the kernel read-only data: 964k
[    0.568430] udev: starting version 151
[    0.581727] xen: registering gsi 19 triggering 0 polarity 1
[    0.581742] xen: --> irq=19
[    0.581753] radeonfb 0000:0c:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    0.593162] radeonfb: Found Intel x86 BIOS ROM Image
[    0.604932] radeonfb: Retrieved PLL infos from BIOS
[    0.604991] radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=200.00 Mhz, System=200.00 MHz
[    0.605065] radeonfb: PLL min 20000 max 50000
[    0.629936] SCSI subsystem initialized
[    0.644529] Fusion MPT base driver 3.04.12
[    0.644588] Copyright (c) 1999-2008 LSI Corporation
[    0.647533] tg3.c:v3.102 (September 1, 2009)
[    0.647613] xen: registering gsi 16 triggering 0 polarity 1
[    0.647617] xen_allocate_pirq: returning irq 16 for gsi 16
[    0.647677] xen: --> irq=16
[    0.647683] Already setup the GSI :16
[    0.647737] tg3 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.647804] tg3 0000:01:00.0: setting latency timer to 64
[    0.669077] libata version 3.00 loaded.
[    0.669542] eth0: Tigon3 [partno(BCM95722) rev a200] (PCI Express) MAC address 00:24:e8:78:73:a8
[    0.669620] eth0: attached PHY is 5722/5756 (10/100/1000Base-T Ethernet) (WireSpeed[1])
[    0.669694] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
[    0.669750] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    0.669839] xen: registering gsi 17 triggering 0 polarity 1
[    0.669842] xen_allocate_pirq: returning irq 17 for gsi 17
[    0.669862] usbcore: registered new interface driver usbfs
[    0.669892] usbcore: registered new interface driver hub
[    0.670003] xen: --> irq=17
[    0.670010] Already setup the GSI :17
[    0.670063] tg3 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.670131] tg3 0000:02:00.0: setting latency timer to 64
[    0.670283] usbcore: registered new device driver usb
[    0.672074] ata_piix 0000:00:1f.2: version 2.13
[    0.672091] xen: registering gsi 23 triggering 0 polarity 1
[    0.672103] xen: --> irq=23
[    0.672111] ata_piix 0000:00:1f.2: PCI INT C -> GSI 23 (level, low) -> IRQ 23
[    0.672746] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    0.673481] uhci_hcd: USB Universal Host Controller Interface driver
[    0.683221] Fusion MPT SPI Host driver 3.04.12
[    0.683306] xen: registering gsi 16 triggering 0 polarity 1
[    0.683309] xen_allocate_pirq: returning irq 16 for gsi 16
[    0.683364] xen: --> irq=16
[    0.683368] Already setup the GSI :16
[    0.683419] mptspi 0000:07:08.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.683642] mptbase: ioc0: Initiating bringup
[    0.685025] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.685088] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[    0.689921] eth1: Tigon3 [partno(BCM95722) rev a200] (PCI Express) MAC address 00:24:e8:78:73:a9
[    0.689998] eth1: attached PHY is 5722/5756 (10/100/1000Base-T Ethernet) (WireSpeed[1])
[    0.690072] eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
[    0.690128] eth1: dma_rwctrl[76180000] dma_mask[64-bit]
[    0.690151] Fusion MPT SAS Host driver 3.04.12
[    0.690183] xen: registering gsi 16 triggering 0 polarity 1
[    0.690186] xen_allocate_pirq: returning irq 16 for gsi 16
[    0.690188] xen: --> irq=16
[    0.690192] Already setup the GSI :16
[    0.690195] mptsas 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.690333] mptbase: ioc1: Initiating bringup
[    0.828555] ata_piix 0000:00:1f.2: setting latency timer to 64
[    0.828712] scsi0 : ata_piix
[    0.828970] scsi1 : ata_piix
[    0.829141] ata1: SATA max UDMA/133 cmd 0xbc20 ctl 0xbc10 bmdma 0xbc40 irq 23
[    0.829204] ata2: SATA max UDMA/133 cmd 0xbc28 ctl 0xbc14 bmdma 0xbc48 irq 23
[    0.829295] xen: registering gsi 21 triggering 0 polarity 1
[    0.829313] xen: --> irq=21
[    0.829321] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[    0.829388] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.829393] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.829465] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    0.829609] uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000bc80
[    0.829751] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[    0.829809] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.829881] usb usb1: Product: UHCI Host Controller
[    0.829934] usb usb1: Manufacturer: Linux 2.6.32-5-xen-686 uhci_hcd
[    0.829990] usb usb1: SerialNumber: 0000:00:1d.0
[    0.830172] usb usb1: configuration #1 chosen from 1 choice
[    0.830299] hub 1-0:1.0: USB hub found
[    0.830370] hub 1-0:1.0: 2 ports detected
[    0.830513] xen: registering gsi 21 triggering 0 polarity 1
[    0.830517] xen_allocate_pirq: returning irq 21 for gsi 21
[    0.830572] xen: --> irq=21
[    0.830576] Already setup the GSI :21
[    0.830629] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[    0.830701] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.830707] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.830771] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.830900] ehci_hcd 0000:00:1d.7: debug port 1
[    0.834850] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.834859] ehci_hcd 0000:00:1d.7: irq 21, io mem 0xdf7ffc00
[    0.852021] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.852138] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.852205] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.852278] usb usb2: Product: EHCI Host Controller
[    0.852333] usb usb2: Manufacturer: Linux 2.6.32-5-xen-686 ehci_hcd
[    0.852390] usb usb2: SerialNumber: 0000:00:1d.7
[    0.852565] usb usb2: configuration #1 chosen from 1 choice
[    0.852694] hub 2-0:1.0: USB hub found
[    0.852770] hub 2-0:1.0: 8 ports detected
[    0.852951] xen: registering gsi 22 triggering 0 polarity 1
[    0.852959] xen: --> irq=22
[    0.852965] ata_piix 0000:00:1f.5: PCI INT D -> GSI 22 (level, low) -> IRQ 22
[    0.853029] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    1.012547] ata_piix 0000:00:1f.5: setting latency timer to 64
[    1.012670] scsi2 : ata_piix
[    1.012822] scsi3 : ata_piix
[    1.012915] ata3: SATA max UDMA/133 cmd 0xbc30 ctl 0xbc18 bmdma 0xbc60 irq 22
[    1.012975] ata4: SATA max UDMA/133 cmd 0xbc38 ctl 0xbc1c bmdma 0xbc68 irq 22
[    1.013070] xen: registering gsi 20 triggering 0 polarity 1
[    1.013078] xen: --> irq=20
[    1.013085] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[    1.013153] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    1.013158] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.013225] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.013341] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000bca0
[    1.013470] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.013535] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.013607] usb usb3: Product: UHCI Host Controller
[    1.013660] usb usb3: Manufacturer: Linux 2.6.32-5-xen-686 uhci_hcd
[    1.013715] usb usb3: SerialNumber: 0000:00:1d.1
[    1.013879] usb usb3: configuration #1 chosen from 1 choice
[    1.014008] hub 3-0:1.0: USB hub found
[    1.014073] hub 3-0:1.0: 2 ports detected
[    1.014201] xen: registering gsi 21 triggering 0 polarity 1
[    1.014204] xen_allocate_pirq: returning irq 21 for gsi 21
[    1.014259] xen: --> irq=21
[    1.014263] Already setup the GSI :21
[    1.014315] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[    1.014378] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.014383] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.014444] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.014545] uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000bcc0
[    1.014663] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.014720] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.014793] usb usb4: Product: UHCI Host Controller
[    1.014846] usb usb4: Manufacturer: Linux 2.6.32-5-xen-686 uhci_hcd
[    1.014902] usb usb4: SerialNumber: 0000:00:1d.2
[    1.015057] usb usb4: configuration #1 chosen from 1 choice
[    1.016948] hub 4-0:1.0: USB hub found
[    1.017020] hub 4-0:1.0: 2 ports detected
[    1.017131] xen: registering gsi 20 triggering 0 polarity 1
[    1.017134] xen_allocate_pirq: returning irq 20 for gsi 20
[    1.017188] xen: --> irq=20
[    1.017192] Already setup the GSI :20
[    1.017244] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 20 (level, low) -> IRQ 20
[    1.017307] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    1.017312] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    1.017372] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    1.017473] uhci_hcd 0000:00:1d.3: irq 20, io base 0x0000bce0
[    1.017593] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.017650] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.017722] usb usb5: Product: UHCI Host Controller
[    1.017776] usb usb5: Manufacturer: Linux 2.6.32-5-xen-686 uhci_hcd
[    1.017832] usb usb5: SerialNumber: 0000:00:1d.3
[    1.017986] usb usb5: configuration #1 chosen from 1 choice
[    1.018114] hub 5-0:1.0: USB hub found
[    1.018181] hub 5-0:1.0: 2 ports detected
[    1.184020] ioc0: LSI53C1020A A1: Capabilities={Initiator,Target}
[    1.220021] usb 2-7: new high speed USB device using ehci_hcd and address 3
[    1.341504] ata3: SATA link down (SStatus 0 SControl 300)
[    1.352357] usb 2-7: New USB device found, idVendor=04b4, idProduct=6560
[    1.352422] usb 2-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.352547] usb 2-7: configuration #1 chosen from 1 choice
[    1.352776] hub 2-7:1.0: USB hub found
[    1.352981] hub 2-7:1.0: 2 ports detected
[    1.392023] ioc1: LSISAS1068E B3: Capabilities={Initiator}
[    1.392239] mptsas 0000:03:00.0: setting latency timer to 64
[    1.396528] radeonfb: Monitor 1 type CRT found
[    1.396588] radeonfb: EDID probed
[    1.396644] radeonfb: Monitor 2 type no found
[    1.464024] usb 3-1: new low speed USB device using uhci_hcd and address 2
[    1.492085] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.500270] ata4.00: ATAPI: HL-DT-STDVD-ROM DH10N, 0D09, max UDMA/100
[    1.516280] ata4.00: configured for UDMA/100
[    1.656483] usb 3-1: New USB device found, idVendor=051d, idProduct=0002
[    1.656486] usb 3-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    1.656490] usb 3-1: Product: Smart-UPS 750 FW:651.18.I USB FW:7.3
[    1.656493] usb 3-1: Manufacturer: American Power Conversion
[    1.656496] usb 3-1: SerialNumber: AS0836241701
[    1.656679] usb 3-1: configuration #1 chosen from 1 choice
[    1.696275] scsi4 : ioc0: LSI53C1020A A1, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=16
[    1.766412] Console: switching to colour frame buffer device 128x48
[    1.768122] usb 2-7.1: new low speed USB device using ehci_hcd and address 4
[    1.804425] radeonfb (0000:0c:07.0): ATI Radeon 515e "Q^"
[    1.856027] ata2.00: failed to resume link (SControl 0)
[    1.876491] usb 2-7.1: New USB device found, idVendor=413c, idProduct=2106
[    1.876648] usb 2-7.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.876788] usb 2-7.1: Product: Dell QuietKey Keyboard
[    1.876895] usb 2-7.1: Manufacturer: Dell
[    1.877086] usb 2-7.1: configuration #1 chosen from 1 choice
[    2.176521] ata1.01: failed to resume link (SControl 0)
[    2.180505] ata1.00: SATA link down (SStatus 0 SControl 300)
[    2.187854] ata1.01: SATA link down (SStatus 0 SControl 0)
[    2.884029] ata2.01: failed to resume link (SControl 0)
[    2.888008] ata2.00: SATA link down (SStatus 0 SControl 0)
[    2.897036] ata2.01: SATA link down (SStatus 0 SControl 0)
[    2.898106] scsi: waiting for bus probes to complete ...
[    3.688040] floppy0: no floppy controllers found
[    3.841469] scsi 4:0:6:0: Sequential-Access IBM      ULTRIUM-HH3      88M1 PQ: 0 ANSI: 3
[    3.842590] scsi target4:0:6: Beginning Domain Validation
[    3.884143] scsi target4:0:6: Domain Validation skipping write tests
[    3.885318] scsi target4:0:6: Ending Domain Validation
[    3.886581] scsi target4:0:6: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 127)
[    5.893781] scsi 3:0:0:0: CD-ROM            HL-DT-ST DVD-ROM DH10N    0D09 PQ: 0 ANSI: 5
[    5.899113] usbcore: registered new interface driver hiddev
[    5.903215] st: Version 20081215, fixed bufsize 4194304, s/g segs 256
[    5.904951] st 4:0:6:0: Attached scsi tape st0
[    5.906352] st 4:0:6:0: st0: try direct i/o: no (alignment 512 B)
[    5.911399] device-mapper: uevent: version 1.0.3
[    5.912354] osst :I: Tape driver with OnStream support version 0.99.4
[    5.912355] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
[    5.916429] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    5.920495] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
[    5.922264] Uniform CD-ROM driver Revision: 3.20
[    5.924141] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    5.929060] st 4:0:6:0: Attached scsi generic sg0 type 1
[    5.930951] sr 3:0:0:0: Attached scsi generic sg1 type 5
[    7.688636] generic-usb 0003:051D:0002.0001: hiddev0,hidraw0: USB HID v1.10 Device [American Power Conversion Smart-UPS 750 FW:651.18.I USB FW:7.3] on usb-0000:00:1d.1-1/input0
[    7.700728] input: Dell Dell QuietKey Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-7/2-7.1/2-7.1:1.0/input/input0
[    7.702752] generic-usb 0003:413C:2106.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell QuietKey Keyboard] on usb-0000:00:1d.7-7.1/input0
[    7.706559] usbcore: registered new interface driver usbhid
[    7.708541] usbhid: v2.6:USB HID core driver
[   31.449318] scsi5 : ioc1: LSISAS1068E B3, FwRev=00192f00h, Ports=1, MaxQ=266, IRQ=16
[   31.488908] mptsas: ioc1: attaching ssp device: fw_channel 0, fw_id 9, phy 0, sas_addr 0x5000c500136ce451
[   31.492483] scsi 5:0:0:0: Direct-Access     SEAGATE  ST3300656SS      HS0A PQ: 0 ANSI: 5
[   31.497002] scsi 5:0:0:0: Attached scsi generic sg2 type 0
[   31.500911] mptsas: ioc1: attaching ssp device: fw_channel 0, fw_id 1, phy 1, sas_addr 0x5000c500134dc8dd
[   31.504536] scsi 5:0:1:0: Direct-Access     SEAGATE  ST3300656SS      HS0A PQ: 0 ANSI: 5
[   31.509149] scsi 5:0:1:0: Attached scsi generic sg3 type 0
[   31.513183] mptsas: ioc1: attaching sata device: fw_channel 0, fw_id 8, phy 2, sas_addr 0x1221000002000000
[   31.518569] scsi 5:0:2:0: Direct-Access     ATA      ST3500418AS      CC38 PQ: 0 ANSI: 5
[   31.522967] scsi 5:0:2:0: Attached scsi generic sg4 type 0
[   31.526953] mptsas: ioc1: attaching sata device: fw_channel 0, fw_id 3, phy 3, sas_addr 0x1221000003000000
[   31.532525] scsi 5:0:3:0: Direct-Access     ATA      ST3500418AS      CC38 PQ: 0 ANSI: 5
[   31.537048] scsi 5:0:3:0: Attached scsi generic sg5 type 0
[   31.541215] mptsas: ioc1: attaching raid volume, channel 1, id 2
[   31.544413] scsi 5:1:2:0: Direct-Access     Dell     VIRTUAL DISK     1028 PQ: 0 ANSI: 5
[   31.554080] scsi 5:1:2:0: Attached scsi generic sg6 type 0
[   31.556583] mptsas: ioc1: attaching raid volume, channel 1, id 0
[   31.559889] scsi 5:1:0:0: Direct-Access     Dell     VIRTUAL DISK     1028 PQ: 0 ANSI: 5
[   31.569827] scsi 5:1:0:0: Attached scsi generic sg7 type 0
[   31.580307] sd 5:1:2:0: [sda] 975699968 512-byte logical blocks: (499 GB/465 GiB)
[   31.580872] sd 5:1:0:0: [sdb] 584843264 512-byte logical blocks: (299 GB/278 GiB)
[   31.581576] sd 5:1:0:0: [sdb] Write Protect is off
[   31.581579] sd 5:1:0:0: [sdb] Mode Sense: 03 00 00 08
[   31.582042] sd 5:1:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[   31.583541]  sdb: sdb1
[   31.593866] sd 5:1:2:0: [sda] Write Protect is off
[   31.596489] sd 5:1:2:0: [sda] Mode Sense: 03 00 00 08
[   31.597339] sd 5:1:2:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   31.601351] sd 5:1:0:0: [sdb] Attached SCSI disk
[   31.605067]  sda: sda1
[   31.617535] sd 5:1:2:0: [sda] Attached SCSI disk
[   31.790858] kjournald starting.  Commit interval 5 seconds
[   31.790864] EXT3-fs: mounted filesystem with ordered data mode.
[   31.850128] device-mapper: table: 254:5: linear: Invalid argument count
[   31.852715] device-mapper: ioctl: error adding target to table
[   31.882808] device-mapper: table: 254:6: linear: Invalid argument count
[   31.885375] device-mapper: ioctl: error adding target to table
[   31.915352] device-mapper: table: 254:7: linear: Invalid argument count
[   31.917889] device-mapper: ioctl: error adding target to table
[   31.947932] device-mapper: table: 254:8: linear: Invalid argument count
[   31.950446] device-mapper: ioctl: error adding target to table
[   33.299364] udev: starting version 151
[   33.300630] EXT3 FS on dm-0, internal journal
[   34.170864] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[   34.171047] ACPI: Power Button [PWRF]
[   34.209774] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[   34.220628] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   34.261415] EDAC MC: Ver: 2.1.0 Dec 10 2010
[   34.264368] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   34.281600] i5100_edac: unsupported configuration.
[   34.661240] ADDRCONF(NETDEV_UP): eth1: link is not ready
[   34.709727] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   35.084407] lp: driver loaded but no devices found
[   35.306953] kjournald starting.  Commit interval 5 seconds
[   35.310086] EXT3 FS on dm-4, internal journal
[   35.313060] EXT3-fs: mounted filesystem with ordered data mode.
[   35.646372] Adding 10485752k swap on /dev/mapper/data-swap.  Priority:-1 extents:1 across:10485752k 
[   36.321633] tg3: eth0: Link is up at 100 Mbps, full duplex.
[   36.321759] tg3: eth0: Flow control is off for TX and off for RX.
[   36.322081] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   37.031350] tg3: eth1: Link is up at 1000 Mbps, full duplex.
[   37.031480] tg3: eth1: Flow control is on for TX and on for RX.
[   37.031767] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[   37.204042] floppy0: no floppy controllers found
[   39.231513] kjournald starting.  Commit interval 5 seconds
[   39.231856] EXT3 FS on dm-1, internal journal
[   39.231997] EXT3-fs: mounted filesystem with ordered data mode.
[   39.272442] kjournald starting.  Commit interval 5 seconds
[   39.273434] EXT3 FS on dm-2, internal journal
[   39.273582] EXT3-fs: mounted filesystem with ordered data mode.
[   39.455109] kjournald starting.  Commit interval 5 seconds
[   39.455614] EXT3 FS on dm-5, internal journal
[   39.455758] EXT3-fs: mounted filesystem with ordered data mode.
[   39.508271] kjournald starting.  Commit interval 5 seconds
[   39.509254] EXT3 FS on dm-3, internal journal
[   39.509391] EXT3-fs: mounted filesystem with writeback data mode.
[   41.139081] hald[985]: segfault at 0 ip b7729aa9 sp bf9f69e0 error 4 in libglib-2.0.so.0.2000.1[b76b8000+b6000]
[   47.048009] eth1: no IPv6 routers present
[   47.148010] eth0: no IPv6 routers present
[   48.620442] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[   48.620446] vboxdrv: Successfully done.
[   48.620449] vboxdrv: Found 4 processor cores.
[   48.620825] vboxdrv: fAsync=0 offMin=0x51d offMax=0x6015f
[   48.621776] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   48.621780] vboxdrv: Successfully loaded version 3.2.10 (interface 0x00140001).
[   49.725035] Event-channel device installed.
[   50.040702] XENBUS: Unable to read cpu state
[   50.041241] XENBUS: Unable to read cpu state
[   50.041514] XENBUS: Unable to read cpu state
[   50.041983] XENBUS: Unable to read cpu state
[   51.545054] Bridge firewalling registered
[   52.312435] ADDRCONF(NETDEV_UP): peth0: link is not ready
[   53.893686] tg3: peth0: Link is up at 100 Mbps, full duplex.
[   53.893689] tg3: peth0: Flow control is off for TX and off for RX.
[   53.893835] ADDRCONF(NETDEV_CHANGE): peth0: link becomes ready
[   54.332570] device peth0 entered promiscuous mode
[   54.339920] xenbr0: port 1(peth0) entering forwarding state
[   64.100012] peth0: no IPv6 routers present
[   64.540013] xenbr0: no IPv6 routers present
[  169.282738] warning: `ntpd' uses 32-bit capabilities (legacy support in use)
[  194.114473] usb 2-7.1: USB disconnect, address 4
[49977.268342] ------------[ cut here ]------------
[49977.268444] kernel BUG at /build/buildd-linux-2.6_2.6.32-29-i386-Of6Yt1/linux-2.6-2.6.32/debian/build/source_i386_xen/arch/x86/xen/enlighten.c:309!
[49977.268680] invalid opcode: 0000 [#1] SMP 
[49977.268802] last sysfs file: /sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/bInterfaceClass
[49977.268958] Modules linked in: bridge stp xen_evtchn xenfs vboxnetadp vboxnetflt vboxdrv lp parport i5100_edac shpchp psmouse edac_core processor pci_hotplug dcdbas serio_raw acpi_processor button evdev ext3 jbd mbcache sd_mod crc_t10dif sg osst sr_mod dm_mod st cdrom usbhid hid mptsas ata_generic ehci_hcd mptspi mptscsih scsi_transport_sas uhci_hcd ata_piix usbcore libata nls_base tg3 libphy mptbase scsi_transport_spi scsi_mod thermal thermal_sys radeonfb fb_ddc i2c_algo_bit i2c_core
[49977.271481] 
[49977.271537] Pid: 2153, comm: server Not tainted (2.6.32-5-xen-686 #1) PowerEdge T300
[49977.271679] EIP: 0061:[<c1003b51>] EFLAGS: 00010282 CPU: 3
[49977.271788] EIP is at set_aliased_prot+0x9e/0x10d
[49977.271882] EAX: ffffffea EBX: f8c57000 ECX: feaec063 EDX: 80000001
[49977.272001] ESI: 00000000 EDI: 80000000 EBP: 000ab6bc ESP: f3ec9a3c
[49977.272127]  DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0069
[49977.272230] Process server (pid: 2153, ti=f3ec8000 task=f13ddd80 task.ti=f3ec8000)
[49977.272304] Stack:
[49977.272304]  80000001 feaec063 00000163 f8c57000 c2e56000 00000001 00000200 f8c57000
[49977.272304] <0> 00002000 f6439100 c1003be2 f3fe6c40 f13ddd80 f3fe6c40 c100b2ab f3fe6c40
[49977.272304] <0> f3fe6c40 c103564a 00000000 c1032456 00000000 c1460e20 f3fe6c40 f5b2e540
[49977.272304] Call Trace:
[49977.272304]  [<c1003be2>] ? xen_free_ldt+0x22/0x30
[49977.272304]  [<c100b2ab>] ? destroy_context+0x38/0x79
[49977.272304]  [<c103564a>] ? __mmdrop+0x1d/0x3a
[49977.272304]  [<c1032456>] ? finish_task_switch+0x76/0x95
[49977.278874]  [<c128d759>] ? schedule+0x762/0x7dc
[49977.278874]  [<c1006048>] ? xen_force_evtchn_callback+0xc/0x10
[49977.278874]  [<c128e080>] ? schedule_hrtimeout_range+0xa1/0xda
[49977.278874]  [<c104d7e2>] ? hrtimer_wakeup+0x0/0x18
[49977.278874]  [<c104e13d>] ? hrtimer_start_range_ns+0xf/0x13
[49977.278874]  [<c10c6dda>] ? poll_schedule_timeout+0x26/0x3e
[49977.278874]  [<c10c772e>] ? do_select+0x3e7/0x42d
[49977.278874]  [<c10d60a8>] ? __getblk+0x3c/0x2f3
[49977.278874]  [<c10c7b1a>] ? __pollwait+0x0/0xa5
[49977.278874]  [<c10d8581>] ? __bread+0xa/0x5d
[49977.278874]  [<f865ff47>] ? ext3_get_branch+0x5d/0xc4 [ext3]
[49977.278874]  [<c113db3e>] ? cpumask_next_and+0x23/0x33
[49977.278874]  [<c102fa45>] ? find_busiest_group+0x2e9/0x6e6
[49977.278874]  [<c100676f>] ? xen_restore_fl_direct_end+0x0/0x1
[49977.278874]  [<c128e8e9>] ? _spin_unlock_irqrestore+0xd/0xf
[49977.278874]  [<c1006048>] ? xen_force_evtchn_callback+0xc/0x10
[49977.278874]  [<c1006778>] ? check_events+0x8/0xc
[49977.278874]  [<c100676f>] ? xen_restore_fl_direct_end+0x0/0x1
[49977.278874]  [<c1004373>] ? xen_mc_flush+0x130/0x150
[49977.278874]  [<c100395d>] ? xen_end_context_switch+0x8/0x10
[49977.278874]  [<c1007d25>] ? __switch_to+0x124/0x141
[49977.278874]  [<c103241c>] ? finish_task_switch+0x3c/0x95
[49977.278874]  [<c128d786>] ? schedule+0x78f/0x7dc
[49977.278874]  [<c1006048>] ? xen_force_evtchn_callback+0xc/0x10
[49977.278874]  [<c1006778>] ? check_events+0x8/0xc
[49977.278874]  [<c1006048>] ? xen_force_evtchn_callback+0xc/0x10
[49977.278874]  [<c1006778>] ? check_events+0x8/0xc
[49977.278874]  [<c113db10>] ? cpumask_any_but+0x20/0x2b
[49977.278874]  [<c10259b0>] ? flush_tlb_page+0x4a/0x65
[49977.278874]  [<c1024de7>] ? ptep_set_access_flags+0x59/0x63
[49977.278874]  [<c1004466>] ? __raw_callee_save_xen_pte_val+0x6/0x8
[49977.278874]  [<c10a1a3e>] ? do_wp_page+0x3b9/0x7dd
[49977.278874]  [<c10a1dc0>] ? do_wp_page+0x73b/0x7dd
[49977.278874]  [<c1006048>] ? xen_force_evtchn_callback+0xc/0x10
[49977.278874]  [<c1006048>] ? xen_force_evtchn_callback+0xc/0x10
[49977.278874]  [<c1006778>] ? check_events+0x8/0xc
[49977.278874]  [<c1006048>] ? xen_force_evtchn_callback+0xc/0x10
[49977.278874]  [<c10c78b2>] ? core_sys_select+0x13e/0x1c2
[49977.278874]  [<c1024de7>] ? ptep_set_access_flags+0x59/0x63
[49977.278874]  [<c1004466>] ? __raw_callee_save_xen_pte_val+0x6/0x8
[49977.278874]  [<c10a1a3e>] ? do_wp_page+0x3b9/0x7dd
[49977.278874]  [<c10a1dc0>] ? do_wp_page+0x73b/0x7dd
[49977.278874]  [<c1006048>] ? xen_force_evtchn_callback+0xc/0x10
[49977.278874]  [<c1290598>] ? do_page_fault+0x2f1/0x307
[49977.278874]  [<c1021357>] ? pvclock_clocksource_read+0xf9/0x10f
[49977.278874]  [<c1021357>] ? pvclock_clocksource_read+0xf9/0x10f
[49977.278874]  [<c1052360>] ? ktime_get_ts+0xcd/0xd5
[49977.278874]  [<c10c7af9>] ? sys_select+0x6e/0x8f
[49977.278874]  [<c1008ebb>] ? sysenter_do_call+0x12/0x28
[49977.278874] Code: ea 0c c1 e0 0c 09 d1 09 c3 89 ca 89 d8 ff 15 8c fe 3c c1 31 f6 89 c1 8b 5c 24 0c 89 44 24 04 89 14 24 e8 73 e6 ff ff 85 c0 74 04 <0f> 0b eb fe 8b 54 24 10 89 e8 c1 e0 05 8b 04 10 c1 e8 1e 69 c0 
[49977.278874] EIP: [<c1003b51>] set_aliased_prot+0x9e/0x10d SS:ESP 0069:f3ec9a3c
[49977.358974] ---[ end trace 1a4a8585d4c62796 ]---
[50758.229664] ------------[ cut here ]------------
[50758.230950] kernel BUG at /build/buildd-linux-2.6_2.6.32-29-i386-Of6Yt1/linux-2.6-2.6.32/debian/build/source_i386_xen/arch/x86/xen/enlighten.c:309!
[50758.233540] invalid opcode: 0000 [#2] SMP 
[50758.233628] last sysfs file: /sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/bInterfaceClass
[50758.233628] Modules linked in: bridge stp xen_evtchn xenfs vboxnetadp vboxnetflt vboxdrv lp parport i5100_edac shpchp psmouse edac_core processor pci_hotplug dcdbas serio_raw acpi_processor button evdev ext3 jbd mbcache sd_mod crc_t10dif sg osst sr_mod dm_mod st cdrom usbhid hid mptsas ata_generic ehci_hcd mptspi mptscsih scsi_transport_sas uhci_hcd ata_piix usbcore libata nls_base tg3 libphy mptbase scsi_transport_spi scsi_mod thermal thermal_sys radeonfb fb_ddc i2c_algo_bit i2c_core
[50758.233628] 
[50758.233628] Pid: 951, comm: syslogd Tainted: G      D    (2.6.32-5-xen-686 #1) PowerEdge T300
[50758.233628] EIP: 0061:[<c1003b51>] EFLAGS: 00010282 CPU: 3
[50758.233628] EIP is at set_aliased_prot+0x9e/0x10d
[50758.233628] EAX: ffffffea EBX: f8c69000 ECX: daf73063 EDX: 80000001
[50758.233628] ESI: 00000000 EDI: 80000000 EBP: 000cf143 ESP: f5a11a3c
[50758.233628]  DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0069
[50758.233628] Process syslogd (pid: 951, ti=f5a10000 task=f5ad8440 task.ti=f5a10000)
[50758.233628] Stack:
[50758.258323]  80000001 daf73063 00000163 f8c69000 c2e56000 00000001 00000200 f8c69000
[50758.258323] <0> 00002000 f6439100 c1003be2 f3fe7180 f5ad8440 f3fe7180 c100b2ab f3fe7180
[50758.258323] <0> f3fe7180 c103564a 00000000 c1032456 00000000 c1460e20 f3fe7180 f5b2f180
[50758.258323] Call Trace:
[50758.258323]  [<c1003be2>] ? xen_free_ldt+0x22/0x30
[50758.258323]  [<c100b2ab>] ? destroy_context+0x38/0x79
[50758.258323]  [<c103564a>] ? __mmdrop+0x1d/0x3a
[50758.258323]  [<c1032456>] ? finish_task_switch+0x76/0x95
[50758.258323]  [<c128d759>] ? schedule+0x762/0x7dc
[50758.258323]  [<f862d212>] ? do_get_write_access+0x37b/0x3c6 [jbd]
[50758.258323]  [<c10d6062>] ? __find_get_block+0x163/0x16d
[50758.258323]  [<c109537c>] ? activate_page+0xcc/0xd1
[50758.258323]  [<c10953a7>] ? mark_page_accessed+0x26/0x37
[50758.258323]  [<c128e01b>] ? schedule_hrtimeout_range+0x3c/0xda
[50758.258323]  [<c1006048>] ? xen_force_evtchn_callback+0xc/0x10
[50758.258323]  [<c1006778>] ? check_events+0x8/0xc
[50758.258323]  [<c100676f>] ? xen_restore_fl_direct_end+0x0/0x1
[50758.258323]  [<c128e8e9>] ? _spin_unlock_irqrestore+0xd/0xf
[50758.258323]  [<c124d401>] ? sock_poll_wait+0xd/0x14
[50758.258323]  [<c10c6dda>] ? poll_schedule_timeout+0x26/0x3e
[50758.258323]  [<c10c772e>] ? do_select+0x3e7/0x42d
[50758.258323]  [<c10c7b1a>] ? __pollwait+0x0/0xa5
[50758.258323]  [<c10c7bbf>] ? pollwake+0x0/0x65
[50758.258323]  [<c1055c3c>] ? tick_program_event+0x1f/0x23
[50758.258323]  [<c104db2d>] ? hrtimer_interrupt+0x117/0x1cf
[50758.258323]  [<c10065af>] ? xen_timer_interrupt+0x248/0x257
[50758.258323]  [<c1006778>] ? check_events+0x8/0xc
[50758.308687]  [<c10738b6>] ? handle_IRQ_event+0xf7/0x101
[50758.308687]  [<c1074b56>] ? handle_percpu_irq+0x40/0x51
[50758.308687]  [<c1199037>] ? __xen_evtchn_do_upcall+0xfd/0x135
[50758.308687]  [<c103c72e>] ? irq_exit+0x36/0x58
[50758.308687]  [<c11993d6>] ? xen_evtchn_do_upcall+0x22/0x2c
[50758.308687]  [<c1009b5f>] ? xen_do_upcall+0x7/0xc
[50758.308687]  [<c1006048>] ? xen_force_evtchn_callback+0xc/0x10
[50758.308687]  [<c1006778>] ? check_events+0x8/0xc
[50758.308687]  [<c100676f>] ? xen_restore_fl_direct_end+0x0/0x1
[50758.308687]  [<c128e8e9>] ? _spin_unlock_irqrestore+0xd/0xf
[50758.308687]  [<c1290608>] ? atomic_notifier_call_chain+0xc/0xf
[50758.308687]  [<c11bc74d>] ? do_con_write+0x1993/0x19cd
[50758.308687]  [<c1006048>] ? xen_force_evtchn_callback+0xc/0x10
[50758.308687]  [<c100edf4>] ? save_i387_fxsave+0x5e/0x73
[50758.308687]  [<c1144273>] ? copy_from_user+0x27/0x10e
[50758.308687]  [<c10c78b2>] ? core_sys_select+0x13e/0x1c2
[50758.308687]  [<c100ecd0>] ? restore_i387_fxsave+0x5c/0x6d
[50758.308687]  [<c100f2d5>] ? restore_i387_xstate+0x18b/0x1c5
[50758.333348]  [<c104e12a>] ? hrtimer_start+0xd/0x11
[50758.333348]  [<c103aa77>] ? do_setitimer+0x14e/0x1d0
[50758.333348]  [<c10c7af9>] ? sys_select+0x6e/0x8f
[50758.333348]  [<c1008ebb>] ? sysenter_do_call+0x12/0x28
[50758.333348] Code: ea 0c c1 e0 0c 09 d1 09 c3 89 ca 89 d8 ff 15 8c fe 3c c1 31 f6 89 c1 8b 5c 24 0c 89 44 24 04 89 14 24 e8 73 e6 ff ff 85 c0 74 04 <0f> 0b eb fe 8b 54 24 10 89 e8 c1 e0 05 8b 04 10 c1 e8 1e 69 c0 
[50758.333348] EIP: [<c1003b51>] set_aliased_prot+0x9e/0x10d SS:ESP 0069:f5a11a3c
[50758.352284] ---[ end trace 1a4a8585d4c62797 ]---
[432035.265556] hub 3-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
[432035.266896] usb 3-1: USB disconnect, address 2
[432035.508030] usb 3-1: new low speed USB device using uhci_hcd and address 3
[432035.700317] usb 3-1: New USB device found, idVendor=051d, idProduct=0002
[432035.701753] usb 3-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[432035.703167] usb 3-1: Product: Smart-UPS 750 FW:651.18.I USB FW:7.3
[432035.704288] usb 3-1: Manufacturer: American Power Conversion
[432035.704288] usb 3-1: SerialNumber: AS0836241701
[432035.708129] usb 3-1: configuration #1 chosen from 1 choice
[432037.648859] generic-usb 0003:051D:0002.0003: hiddev0,hidraw0: USB HID v1.10 Device [American Power Conversion Smart-UPS 750 FW:651.18.I USB FW:7.3] on usb-0000:00:1d.1-1/input0
[432045.192192] usb 2-7.1: new low speed USB device using ehci_hcd and address 5
[432045.304066] usb 2-7.1: New USB device found, idVendor=413c, idProduct=2106
[432045.305661] usb 2-7.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[432045.307261] usb 2-7.1: Product: Dell QuietKey Keyboard
[432045.308037] usb 2-7.1: Manufacturer: Dell
[432045.312195] usb 2-7.1: configuration #1 chosen from 1 choice
[432045.322790] input: Dell Dell QuietKey Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-7/2-7.1/2-7.1:1.0/input/input2
[432045.325159] generic-usb 0003:413C:2106.0004: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell QuietKey Keyboard] on usb-0000:00:1d.7-7.1/input0
